-
Home
-
Products and services
-
Blind rivet
-
Open end blind rivet
-
Closed blind rivet
-
Double stranded blind rivet
-
Lantern type blind rivet
-
Pull pattern blind rivets
-
Hollow core pulling rivet
-
Grooved blind rivet
-
Single strand blind rivet
-
Hippocampal blind rivet
-
Drawing type blind rivets
-
Self-locking blind rivets
-
Closed lantern rivet
-
Ring groove rivet
-
Fast rivets
-
-
Rivet nut
-
Riveting tool
-
Customized
-
Service
-
-
Application
-
About Us
How to use pneumatic rivet gun
Use method of pneumatic rivet gun:
1. Before use, a small amount of lubricating oil is dripped into the air source interface to ensure the performance of the tool;
2. Replace the matching gun head, which generally has 2.4, 3.0 / 3.2, 4.0, 4.8 / 5.0 and 6.0 / 6.4 specifications;
3. When the air source is connected, the air pressure at the interface of tebfu pneumatic rivet gun is set at 5-7 kg. If the air pressure is too low, the efficiency will be reduced, resulting in the failure of normal riveting;
4. The rivet rod is inserted into the gun head to make the gun head fit with the brim plane, and the trigger is pulled for riveting;
5. After the riveting is completed, the broken pin rod is discharged and riveted for the next time;
6. After operation, disconnect the tool from the air source.
The company is committed to providing high-quality riveting and fastening products and one-stop riveting and fastening system solutions for customers.
Consult