Usage method of pneumatic rivet gun: 1. Before use, drop a small amount of lubricating oil into the air source interface to ensure the tool's performance; 2. Replace with the matching nozzle, which generally comes in sizes 2.4, 3.0/3.2, 4.0, 4.8/5.0, 6.0/6.4; 3. Connect the air source, the pressure for the special Beifu pneumatic rivet gun is specified at 5-7 kg. If the pressure is too low, it will reduce efficiency and may prevent normal riveting; 4. Insert the rivet rod into the nozzle, ensuring the nozzle is flush with the cap edge, then pull the trigger to rivet; 5. After riveting is complete, eject the broken rivet rod and proceed to the next riveting; 6. After the work is completed, disconnect the tool from the air source.

How to use a pneumatic rivet gun:

1. Before use, drop a small amount of lubricating oil into the air source interface to ensure the tool's performance;

2. Replace with a matching nozzle, generally available in sizes 2.4, 3.0/3.2, 4.0, 4.8/5.0, 6.0/6.4;

3. Connect the air source, the specified air pressure for the special Beifu pneumatic rivet gun is 5-7 kg, too low air pressure will reduce efficiency and cause failure to pull rivets normally;

4. Insert the rivet rod into the nozzle, ensuring the nozzle is flush with the cap edge, and pull the trigger to pull the rivet;

5. After pulling the rivet, eject the broken rivet rod and proceed to the next riveting;

6. After completing the work, disconnect the tool from the air source.