中文 English
PRODUCTS
PRODUCTS
Rivet material
Brim type
Riveting performance requirements
Hat brim type
Diameter of rivet
Material of rivet
condition:
clear condition


Letter screening comparison table of riveting performance requirements

A = Conventional riveting

B = Multi layer riveting + seismic performance + general sealing + no abnormal sound in connection

C = Seismic performance + no abnormal sound of connection + high strength

D= Multi layer riveting + connection without abnormal sound + wide riveting range + complete sealing + high strength + high clamping force

E = General sealing + connection without abnormal sound + high strength

F = Conductivity + total closure

G =Complete closure

H = Electrical conductivity

I =Soft riveting material

J = Seismic performance + general sealing + no abnormal sound of connection + high strength

K = No abnormal sound in connection + soft riveting material

L = Seismic performance + no abnormal sound of connection + high strength + high clamping force


Full steel hollow type blind rivet double countersunk SSDC 3.2mm

Full steel hollow type blind rivet double countersunk SSDC 3.2mm

The blind rivet, also known as the pull-through rivet, does not have a nail head that falls off after riveting, and the riveting surface is relatively flat. It is necessary to create a countersink on both sides of the material. It is widely used in communication cabinets in the IT industry and is particularly suitable for riveting thin plates in space-constrained environments.

Aluminum carbon steel double drum type blind rivet large brim G model AB02L-G

Aluminum carbon steel double drum type blind rivet large brim G model AB02L-G

It has good hole-filling properties; after riveting, one or more large bulges are formed at the axial blind end, evenly distributing the load.

All-aluminum closed type lantern rivet waterproof lantern rivet 5.2-7.5 AATF

All-aluminum closed type lantern rivet waterproof lantern rivet 5.2-7.5 AATF

Waterproof lantern rivets are a type of structural rivet evolved from traditional lantern rivets. They feature a rubber washer added to the back of the cap, which effectively provides waterproofing. During riveting, the core of the rivet pulls the blind end of the cap into three large lantern-shaped folds, clamping the two components that need to be riveted together, while the remaining core seals the central hole of the rivet head.

Full steel flat round head ring groove rivet 4.8-10.0 SH

Full steel flat round head ring groove rivet 4.8-10.0 SH

The all-steel flat round head ring groove rivet is a structural type of blind rivet designed for connections that require high strength and safety. It is an anti-loosening blind rivet invented based on the principle of unidirectional tensile strength according to Hooke's Law. It consists of two parts: a steel nail rod and a steel sleeve. Using a special tool, the two items to be riveted are clamped tightly, and the metal of the sleeve is pressed and filled into the annular groove of the rivet pin, ensuring a tight fit between the sleeve and the pin.

All stainless steel flat round head external lock brushed type blind rivet 4.8-6.4 BB71

All stainless steel flat round head external lock brushed type blind rivet 4.8-6.4 BB71

The fully stainless steel external lock rivet has a brushed design, and the head of the rivet adopts a cup-shaped design, allowing the rivet head to have the ability to deform freely. During riveting, the rivet core expands the pipe cap on one side, while on the other side, the rivet core forms a mechanical interlock with the pipe cap. The residual rivet core is automatically locked within the expanded pipe cap. The brushed rivet has a very wide riveting range and provides a strong clamping force on the riveted parts, with good sealing performance and shock resistance, as well as extremely high mechanical strength.

Full steel countersunk external lock brushed type blind rivet 4.8-6.4 SS71C

Full steel countersunk external lock brushed type blind rivet 4.8-6.4 SS71C

The full steel countersunk external lock rivet has a cup-shaped design for the rivet head, allowing the head to have the ability to deform freely. During riveting, the rivet core expands the cap on one side, while on the other side, the rivet core forms a mechanical interlock with the cap. The residual rivet core is automatically locked within the expanded cap. The brim of the cap has a countersunk angle of 100 degrees, resulting in a smooth surface after riveting. The external lock rivet has a wide riveting range, provides strong clamping force on the workpiece being riveted, has good sealing performance and shock resistance, and possesses very high mechanical strength.

Full steel flat round head internal lock pull-out type blind rivet 4.8-10 SS81

Full steel flat round head internal lock pull-out type blind rivet 4.8-10 SS81

The full steel internal lock pull rivet has a cup-shaped design for the rivet head, allowing the head to have the ability to deform freely. During riveting, the rivet core expands the cap on one side, while on the other side, the rivet core forms a mechanical interlock with the cap. The residual rivet core is automatically locked within the expanded cap. The pull rivet has a wide riveting range and provides a strong clamping force on the riveted parts, with good sealing performance and shock resistance, as well as very high mechanical strength.

All stainless steel large eaves closed type blind rivets 3.2-4.8 BBFL B2B2FL B4B4FL

All stainless steel large eaves closed type blind rivets 3.2-4.8 BBFL B2B2FL B4B4FL

Waterproof, no nail core falling off.

< 1234...11 >
Picture Name

The company is committed to providing high-quality riveting and fastening products and one-stop riveting and fastening system solutions for customers.

> About Shingo

> Products & Services

> News Center

> Industry Solutions

Contact Information

Picture Name

Address: Building L4, Weihang Road 218, Baoshan District, Shanghai

Picture Name

Tel: 021-66788195

Picture Name

Fax: 021-66788295

Picture Name

E-mail：xinwu@xinwush.com

Contact Information

yzm
Submit

Copyright 2020 Xinwu Riveting And Fastening System (Shanghai) Co., Ltd  沪ICP备14018700号-1  Powered By:China Enterprise Power  Suzhou