Products and Services
![[Industrial Grade] M2308 Fully Automatic Rivet Nut Gun Product/Riveting Range M3-M8mm](https://omo-oss-image.thefastimg.com/portal-saas/pg2024122318275479633/cms/image/c5f1eb83-d24d-4f9e-8356-fe65744cb4e8.png "[Industrial Grade] M2308 Fully Automatic Rivet Nut Gun Product/Riveting Range M3-M8mm")
[Industrial Grade] M2308 Fully Automatic Rivet Nut Gun Product/Riveting Range M3-M8mm
[Industrial Grade] M2308 Fully Automatic Rivet Nut Gun Product/Riveting Range M3-M8mm
Way of working：
Pneumatic
Function type：
Rivet nut / Column gun
Performance level：
Industrial grade
- Product description
-
The TEBEF fully automatic rivet nut gun M2308 is a fully automatic pull cap gun with excellent performance, capable of pulling various material specifications of rivet nuts from M3 to M12. Working pulling force: 14000N-19600N, working stroke: 1-7mm (adjustable); tool weight 1.7Kg, motor never stalls, low noise, easy and efficient operation, making it the preferred product among pneumatic tools for rivet nuts.
Troubleshooting Fault Causes Exclusion measures 1. Control lever has air leakage Is 48#.45#.44#."O" ring wear Replace the above "O" rings 2. Oil mist is sprayed from the exhaust port Moisture mixed in compression Drain the water from the oil-water separator and air compressor cleanly 3. The return rivet reset speed is slow Lack of grease Drip two drops of TEBEF special hydraulic oil at the air inlet 4. Rivet nut bulging is insufficient
Or insufficient tightening1. Pull rod wear
2. Stroke adjustment is incorrect
3. Air pressure is low
4. Insufficient hydraulic oil
5. Workpiece plate thickness does not match1. Replace the corresponding pull rod
2. Recalibrate the stroke
3. Adjust the air pressure
4. Add hydraulic oil
5. Check the dimensions of the rivet nut and the thickness of the riveted plate5. The pull rod keeps rotating backward 1. Hydraulic oil deteriorated, swollen
2. 25# reset spring fatigue1. Replace hydraulic oil
2. Replace 25# reset spring6. The pull rod cannot rotate forward
The pull rod cannot rotate backward1. Pneumatic motor rotation is blocked
2. 14.5# fixed nut is loose1. Check the air circuit and clear the blockage
2. Single-sided jog twice, if it still does not rotate, the motor must be disassembled for cleaning and lubrication of the components
3. Tighten the fixed nut of the pneumatic motor7. Rivet nut cannot be screwed in
Rivet nut cannot be retracted1. The pull rod is not selected correctly
2. The thread of the pull rod has impurities
3. The rivet nut is not selected correctly1. Replace with the corresponding pull rod
2. Use a brass brush to clean the thread impurities
3. Replace with rivet nuts of the same specification
No content information is displayed for the time being.
The company is committed to providing high-quality riveting and fastening products and one-stop riveting and fastening system solutions for customers.
Contact Information
Address: Building L4, Weihang Road 218, Baoshan District, Shanghai
Fax: 021-66788295
Copyright 2020 Xinwu Riveting And Fastening System (Shanghai) Co., Ltd 沪ICP备14018700号-1 Powered By:China Enterprise Power Suzhou